EddyStar Max - Eddy Current Sorting System

High-speed eddy current sorting system with 2 upper and 2 lower gates and a wide...

Automatic Water Washable Penetrant Testing System

Fully automatic liquid penetrant line - from pre-wash to inspection - for repeat...

FLAW STAR - Magnetic Flaw Detector

Bench-type magnetic particle inspection system with AC and half-wave DC magnetiz...

Eddy Current Sorting Station with Laser Marking

Custom-built automated eddy current sorting station with PLC/HMI control, stack-...

Inclined Tray Eddy Current Sorting Machine

Special-purpose inclined tray sorting machine with two eddy current stations and...

Robot-Automated Inspection Cell

Industrial-robot loading cell that picks components (engine valves shown) and pr...

AUTOMATIC EDDY CURRENT SORTER

ASME Basic Calibration Block (Side-Drilled Holes)

ASME Section V basic calibration block with side-drilled holes, made to the spec...

BNC Cables

BNC probe and signal cables for eddy current instruments and probes.

Berthold Field Indicator

Berthold-type penetrameter for checking field strength and direction.

Black Magnetic Ink (Aerosol / Bulk)

Ready-to-use black magnetic ink for visible MPI over white contrast paint.

Bulk Penetrant, Remover & Developer

Penetrant, remover and developer in bulk containers for PT lines.

CENTRIFUGE TUBE

COPPER PAD

Conductivity Reference Standards

Reference standards of known conductivity for eddy current conductivity measurem...

Conveyor / Belt-Type Eddy Current Sorting System

Belt-conveyor eddy current sorting for grade, hardness and heat-treatment verifi...

Custom Mock-up / Flaw Specimens

Custom mock-ups and specimens with implanted or machined flaws for procedure qua...

Custom Probe Fixtures & Holders

Part-specific fixtures and probe holders for repeatable eddy current sorting and...

DAC / TCG Reference Block

Block with reflectors at several depths for constructing DAC and TCG curves.

Dry Magnetic Powder

Dry-method particles for rough surfaces and elevated temperatures.

ECT Bobbin Probes

Differential / absolute bobbin probes for heat-exchanger and condenser tubes in...

ECT Calibration Tube

Reference tube with machined defects (ASME-style) for ECT bobbin probe calibrati...

ECT Surface Reference Block (EDM Notches)

Reference block with EDM notches of known depth for surface probe calibration.

Eddy Current Crack Detection Station

Special purpose station for automated eddy current crack detection on machined p...

Encircling Coil Magnetising Unit

Stand-alone coil for longitudinal magnetisation of shafts, bars and elongated pa...

Encircling Coil Sorting Probe

Through-coil probe for grade, hardness and heat-treatment sorting, sized to the...

Encircling Probes

External encircling coils for inspection of tubes, bars and wires from the outsi...

FLAW STAR - Bench Type Wet Horizontal MPI Machine (AC / HWDC)

FLAW STAR variant: wet horizontal bench unit with AC and half-wave DC magnetisat...

Fluorescent Magnetic Ink (Aerosol / Bulk)

Ready-to-use fluorescent magnetic ink in aerosols and bulk containers.

Fluorescent Magnetic Powder

Fluorescent particles for wet-method MPI with high sensitivity under UV-A light.

Fluorescent Penetrant Kit

Aerosol kit for fluorescent penetrant testing under UV-A light.

Fully Automatic MPI System

Special purpose MPI line with conveyor or robotic loading, automatic magnetising...

Gauss Meters - Analog & Digital

Pocket analog field indicators and hand-held digital gauss meters for checking r...

Handheld Demagnetiser

Portable demagnetiser for local demagnetising of large parts and assemblies.

High-Temperature Couplant

Couplant formulated for ultrasonic testing on hot surfaces.

Hot-Air Drying Oven for PT

Recirculating hot-air dryer with temperature control for penetrant lines.

IIW (V1) Calibration Block

IIW type 1 block for range, index point, beam angle and resolution checks.

IRIS Calibration Tube

Reference tube with machined steps and defects for IRIS ultrasonic calibration.

Inline Encircling-Coil ECT System (Bars, Wires, Tubes)

Inline encircling-coil eddy current testing of bars, wires and tubes during prod...

Inspection Dark Booth

Darkened inspection enclosure for fluorescent MPI and PT, sized to the inspectio...

Known Defect Standard (Twin Cracked Chrome Panel)

Twin cracked chrome panels for comparing penetrant sensitivity.

Leak Detection Bubble Solution

Bubble-forming solution for vacuum box and pressure bubble leak testing.

MFL Adapter

Adapter for connecting MFL probes to the eddy current instrument.

MFL Calibration Tube

Reference tube with pits and wall-loss defects for MFL probe calibration.

MFL Probes

Magnetic flux leakage tube probes for pitting detection in ferromagnetic tubes.

MPI Carrier Oil

Low-odour, low-fluorescence carrier for preparing magnetic particle baths.

Magnetising Cables

Flexible high-current cables for cable-wrap and clamp magnetisation.

Manual Penetrant Inspection Station

Modular manual PT line: penetrant, drain, wash, dry, develop and inspection stat...

Mobile MPI Power Pack

High-amperage portable power source for prod, cable-wrap and clamp magnetisation...

Multi-Directional (Combined Field) MPI Machine

Combined-field magnetisation that reveals defects in all orientations in a singl...

NFT Calibration Tube

Finned reference tube with ID defects for NFT calibration.

NFT Probes

Near field testing probes for finned carbon steel tubes such as air coolers.

PAUT Calibration Block (SDH / ACG)

Phased array calibration block for velocity, wedge delay, sensitivity (ACG) and...

PIE GAUGE

PORTABLE MAGNETIC PARTICLE MACHINE

PSM-5 / TAM Penetrant System Monitor Panel

Test panel for daily verification of penetrant system performance.

Permanent Magnet Yoke

Power-free magnetic yoke for MPI where no electrical supply is available or perm...

Pocket Magnetic Field Indicator

Pocket indicator for quick checks of residual magnetism after demagnetising.

Post-Emulsifiable PT Line

Special purpose penetrant line for post-emulsifiable (Method B / D) processes.

Probe Centering Heads / Floats

Replaceable centering devices that keep tube probes centred and reduce wear.

Probe Extension Cables

Extension cables for reaching long tube runs and remote tube sheets.

Prods with Cables

Hand prods with magnetising cables for local current-flow magnetisation.

QQI Shims / Flux Indicator Strips

Quantitative quality indicators for verifying field direction and adequacy durin...

RFT Calibration Tube

Ferromagnetic reference tube with machined wall-loss defects for RFT calibration...

RFT Probes

Remote field testing probes for carbon steel and other ferromagnetic tubes.

Semi-Automatic MPI System

Operator-loaded MPI system with automatic clamping, bath application and magneti...

Semi-Automatic PT System

PT line with timed, automated process steps and manual loading and inspection.

Sliding Demagnetizer

Surface Probes

Pencil, pancake and spot surface probes for crack detection and point sorting.

TOFD Reference Block

Reference block with notches and holes for TOFD set-up and verification.

TUD Cables

Probe cables for tube inspection probes, in standard and custom lengths.

Table-Top (Plate) Demagnetiser

Bench-top plate demagnetiser for small parts, tools and components.

Tunnel / Conveyor Demagnetiser

Through-type AC demagnetiser with conveyor for continuous demagnetising of parts...

UT Couplant Gel

General-purpose ultrasonic couplant gel for contact testing and thickness gaugin...

UV-A & White Light Meter

Meter for verifying UV-A irradiance and ambient white light at the inspection su...

UV-A LED Inspection Lamp

UV-A LED lamp for fluorescent magnetic particle and fluorescent penetrant inspec...

V2 (Miniature) Calibration Block

Compact V2 block for field calibration of angle and straight beam probes.

Vacuum Box (Weld Leak Testing)

Vacuum box for bubble leak testing of welds on tank floors and plates.

Visible (Black / Red) Magnetic Powder

Visible-colour particles for wet-method MPI under white light.

Visible Red Penetrant Kit (Cleaner + Penetrant + Developer)

Aerosol kit for solvent-removable visible penetrant testing.

Water Conditioner (Wetting Agent / Corrosion Inhibitor)

Additive for water-based MPI baths: improves wetting and protects parts against...

White Contrast Paint

Quick-drying white background paint for visible magnetic particle inspection.

YOKE